If you live in a climate with lots of mosquitoes or other flying insects, then you’ve probably got some window screens in your home. Putting the screen back into a window after it has been removed can be challenging. A lot of people struggle with this simple task. We’ll show you how to put a window screen back in and save yourself from future frustration. Entering a window screen can be very difficult if you don’t know what you’re doing. Even more so if it is your first time trying to put the screen back in. It can seem like an impossible task if you are not familiar with the assembly process. The good news is that it isn’t as difficult as it seems, and with just a few simple steps, we will show you how to put a window screen back in no time at all.
How To Put A Window Screen Back In
Check Your Window Screen Before You Start
The first thing you should do when you’re ready to reinstall the screen is to make sure it’s the right screen size. You don’t want to start installing only to realize you need to cut the screen to size. You also want to check that there aren’t any holes or rips in the screen. While it’s possible to patch these, it’s not easy, so it’s best to make sure your screen is in good condition before you start. If you need to replace your screen, you will want to make sure you get the right size. The rule of thumb is to buy one that’s an inch larger than the frame, so you can tuck the screen into the frame all the way around.
Remove the Old Screen
Next, you will want to remove the old screen from the frame. You can do this either by cutting the screen away from the frame using scissors or by using a stepladder to step on the tabs holding the screen in the frame. If you use the ladder method, be careful to not put too much weight on the frame – you don’t want to bend it or break it off the wall. Next, you will want to clean the frame, especially the top and bottom. Make sure you get all the old staples off the frame that held the old screen in place, as well as any staples from the tabs you used to take it off.
Put the screen back in place before the frame
Next, you will want to put the screen back in place before the frame. Start with the top of the screen and work your way down, pulling the screen taut as you go to make sure there are no wrinkles in it. Be careful not to touch the screen where you will be putting the staples, as you could leave marks. You will want to put the staples every 6-8 inches and make sure to use a staple gun and the appropriate staples for the screen you are using.
Make Sure The Hooks Fit In The Holes
Next, make sure the hooks on the inside of the frame line up with the holes on the outside of the frame. If they don’t line up, you can use pliers to bend the hooks so that they do. Next, you will want to put the outside frame back up on the inside of the window frame. Make sure you put the frame up before the screen, as it is harder to do afterward. Once you have the frame up, you can put the staples in the outside frame, and complete the rest of the steps.
Install The Screen Bottom First
Next, you will want to put the screen bottom back on first. This is the part of the screen that is against the window frame. After that, you can put the rest of the screen back on, making sure you put the screen top back on last.
Put The Screen Top Back On
Next, you will want to put the screen top back on. This is the part of the screen that is against the wall. After that, you can put the rest of the screen back on, making sure you put the screen top back on last.
Double-check your work!
Once you have the screen in place, you will want to make sure you have it secured properly. Check for any loose parts or places where the screen might be able to move, and fix them as needed. You’re all done! Now you can enjoy open windows with fresh air and no harmful insects. These tips will have your window screen put back in no time. Remember, it’s easier if you do it in stages. Put the bottom of the screen back on first, then work your way up from the bottom. With these 8 tips in mind, you’ll be putting your window screen back in no time! Now you know how to put a window screen back in. When it comes to home repairs, nothing can be more frustrating than getting halfway through one and then not knowing what you’re doing wrong. These tips will make sure that you get the job done right so that you can spend more time enjoying your home and less time fixing it.
Why Is It So Hard To Put A Screen Back In?
You don’t have the right tools
You’ve probably seen people put the screen back in using a tool like a screwdriver, but that won’t work. In order to put a screen back in, you will need to use a special tool. The one they show on television is called an “invisible fastener” and it looks like this:
You don’t know how to use it
If you’re not used to using tools like this, then you might be missing some important steps. This tool makes putting the screen back in so much easier and faster. If you don’t know how to use one, ask someone who does for help!
You have no patience
If you have no patience, then we can guarantee that putting your window screen back in will be one of the most frustrating parts of your home repairs. If you want to get it done quickly, then follow these steps carefully and make sure you don’t skip any steps!
You get frustrated
If you’re not used to doing home repairs, then you might get frustrated when putting the screen back in. If you have no patience and don’t know how to use the tool, then this is a sure way to make sure your window screen doesn’t go back in.
You skip steps
The last thing that will keep your window screen from going back in is skipping any steps at all. The more steps you miss, the less likely it is that your window screen will go back in correctly! There are a lot of steps involved with putting up a new screen, so don’t rush through them! Follow each step carefully so that when you are done it will be easy to put the rest of the screen back on!
Tips For Putting A Window Screen Back In
Use the right tool
You might think that you can use a screwdriver to put the screen back in, but you will need to use a special tool instead. Look for a tool that looks like this:
Don’t skip steps
If you miss any steps and don’t do them all the way through, then your window screen will never go back in correctly!
Hold the molding tight when putting it back on
It’s important to hold the molding tight when putting it back on the frame. If you don’t, then it won’t stay in place and will come off again when you try to put your window screen back on later!
Use two hands to put the screen back in
It’s much easier with two hands when putting the screen back in. If you try to do it with one hand, then it will be much harder and you might end up breaking your window screen!
Make sure the molding is straight
When you put your window screen back in, make sure that your molding is straight. If it’s crooked, then it will be much harder to get it into the frame!
Putting a window screen back in can seem like an extremely difficult task, but it doesn’t have to be. Follow these simple steps and you should be able to put any screen back in without any difficulties. With these useful tips, you should be able to put a window screen back in without any issues.